Importing Using Mailbox Viewer2 - Fuji Xerox ApeosPort-II C4300 User Manual

You can change the display of
scanner names listed.
To change the display of scanner
names, click [Change Display] in the
scanner selection dialog box.
To display scanners on other
subnetworks, register them in
[Scanner Registration].
Import Method for Scanned
Documents
You can change the display and the
import settings for documents
scanned from a mailbox.
To change the import method, click
[Settings] in the document select
dialog box, and configure the
settings in the dialog box that
appears.

Importing Using Mailbox Viewer2

The following describes how to use Mailbox Viewer2 to import a document from a
machine's mailbox.
Mailbox Viewer2 is software to import documents from a machine's mailbox without
using any client-side application.
For instructions on installing Mailbox Viewer2, refer to the manual contained in the CD-ROM of the
Driver CD Kit.
To learn about fields in the displayed dialog box, click [Help] to see the Mailbox Viewer2 online help.
1
Click [Start] and select [Programs] > [FujiXerox] > [Network Scanner Utility2] >
[Mailbox Viewer2].
Note • If you used another directory for installation, specify the directory instead of above.
2
From the displayed list, click the scanner
name of the machine, and click [Select
Scanner].
Note • If no items are shown in the list, click
• To display the scanner names, use the
• Only when the machine is connected to
[Refresh]. The application searches for
scanners.
dialog box which can be displayed by
clicking [Options]. For information on
how to change the displayed scanner
names, refer to "Changing display of
scanner names" (P.232).
the network, the scanner name is
automatically shown in the list. To view the machine connected to other networks, click on
[Change View] and register an IP address and scanner name. For in formation on how to
change the settings, refer to "Changing display of scanner names" (P.232).
Importing Scanned Data
233
8