Fuji Xerox ApeosPort-II C4300 User Manual page 496

15 Problem Solving
Error Code
C P F S M O
018-791
018-792
018-793
018-794
018-795
15
018-796
018-797
024-742
024-746
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
494
Category
O [Cause]
[Remedy] Have the network administrator check the LDAP server
O [Cause]
[Remedy] Have the network administrator check the LDAP server
O [Cause]
[Remedy] Have the network administrator check the LDAP server
O [Cause]
[Remedy] Have the network administrator check the LDAP server
O [Cause]
[Remedy] Have the network administrator check the LDAP server
O [Cause]
[Remedy] Have the network administrator check the LDAP server
O [Cause]
[Remedy] Have the network administrator check the LDAP server
O [Cause]
[Remedy] Change the [Print Options] setting to split the pages
O [Cause]
[Remedy] Check the print data.
Cause and Remedy
LDAP server protocol error caused by the Address Book
operation. The server returned RFC2251 Result Message
No "91" (server connection error) for Address Book inquiry.
status.
LDAP server protocol error caused by the Address Book
operation. The server returned RFC2251 Result Message
No "92" (unsupported feature) for Address Book inquiry.
status.
LDAP server protocol error caused by the Address Book
operation. The server returned RFC2251 Result Message
No "93" (no results returned) for Address Book inquiry.
status.
LDAP server protocol error caused by the Address Book
operation. The server returned RFC2251 Result Message
No "94" (no more results) for Address Book inquiry.
status.
LDAP server protocol error caused by the Address Book
operation. The server returned RFC2251 Result Message
No "95" (results remaining) for Address Book inquiry.
status.
LDAP server protocol error caused by the Address Book
operation. The server returned RFC2251 Result Message
No "96" (client loop detected) for Address Book inquiry.
status.
LDAP server protocol error caused by the Address Book
operation. The server returned RFC2251 Result Message
No "97" (referral limit exceeded) for Address Book inquiry.
status.
Booklet printing was specified for [Print Options], but the
number of print pages for the job exceeded the maximum
number for booklet creation.
appropriately to create separate volumes, or to cancel the
booklet setting.
The specified paper type is not compatible with the
specified paper size, paper tray, output tray, or 2-sided
printing.