15 Problem Solving
Staple Jams in the Staple Cartridge (C Finisher or C Finisher with Booklet
Maker)
The following describes how to clear staple jams in the staple cartridge when the C
Finisher or the C Finisher with Booklet Maker (optional) is installed.
This section explains how to remove jammed staples from the C Finisher with Booklet
Maker. Use the same procedure for the C Finisher.
1
Make sure that the machine has
stopped, and open the front cover
of the finisher.
2
Grip the lever R1 of the staple
cartridge holder, and pull out the
holder to the right, towards you.
15
3
Take out the staple cartridge holder
by gripping the orange lever.
Note
4
After removing the staple cartridge,
check the inside of the finisher for
any remaining staples.
5
Pull up the metal part of the staple
cartridge shown in the figure.
548
• The staple cartridge is firmly
inserted. When taking the
staple cartridge out of the
machine, strongly pull it out.
Lever (R1)
Orange lever