Specifications - Fuji Xerox ApeosPort-II C4300 User Manual

16 Appendix

Specifications

This section lists the main specifications of the machine. Note that the specifications
and the appearance of the product may change without prior notice.
Copy Feature Specifications
Type
Color support
Scan Resolution
Output resolution
Color gradation
Warm-up time
Copy document
Copy (sheet) size
16
Copy paper
552
Console
Full Color
600×600 dpi (23.6×23.6 dots/mm)
600×600 dpi (23.6×23.6 dots/mm)
256 color gradation for each color (16,700,000 colors).
45 seconds or less (at 20 °C room temperature)
Important • The warm-up time may be 45 seconds or more when an
optional fax kit is installed or depending on the network
environment.
The maximum size is 297×432 mm (A3, 11×17") for both sheets
and books.
[Trays 1 - 4]
Maximum: A3 (297×420 mm), 11×17"(279×432mm)
Minimum : A5 (148×210 mm)
[Bypass tray]
Maximum: 12.6×17.7" (320×449.6 mm), 12×18"
(304.8×457.2mm)
Minimum : postcards (100×148 mm), envelopes (Choukei 3)
(120×235 mm)
Non-standard size: X direction 100 to 483 mm, Y direction 100
to 305 mm
(When copying both sides on non-standard size paper, specify
the size within the range from 140 to 432 mm for the X direction
and from 140 to 297 mm for the Y direction.
Image loss width: First 4 mm or less, last 2 mm or less,
and top/front 2 mm or less.
Important • If the X (width) of non-standard size paper is less than 140
mm, documents may not be printed properly.
Paper Trays 1 - 4 : 64 -169g/m
Paper Tray 5 (Bypass): 55-220g/m
Important • The use of paper recommended by Fuji Xerox is suggested.
Copying may not be performed correctly depending on the
conditions.
2
2