Circuit Breaker - Fuji Xerox ApeosPort-II C4300 User Manual

Circuit Breaker

The machine is provided with a

circuit breaker.

In the event of a current leakage,
the breaker will automatically cut off
the power circuit to prevent any
leakage or fire from occurring.
The <RESET> button is normally in
a pressed-in state as shown in the
figure on the right. When the
machine is to be left unused for a
long period of time or is to be
moved, lightly press the <TEST>
button with the tip of a ball-pen or
other fine-tipped object to cancel
the pressed-in state of the
<RESET> button.
Once a month, check the breaker for correct operation. Also, make sure that it is
earthed. If not, the breaker cannot detect current leakage which can cause electric
shock.
If you notice any unusual conditions, contact our Customer Support Center.
Note • The <RESET> button automatically turns the power off when current leakage is detected.
• Before you cancel the pressed-in state of the <RESET> button, first make sure that the
Normally, do not operate this button.
power switch is off.
Circuit Breaker
ower switch
Reset button
Test button
37
2