Fuji Xerox ApeosPort-II C4300 User Manual page 121

Note • The e-mail received by the fax gateway is deleted even if the fax was not correctly sent.
• The settings configured in [Communication Mode] of the [Transmission Options] screen
• Fax forwarding can be restricted by setting [Fax Transfer from Address Book] and [Fax
1
Display the [Fax/Internet Fax]
screen and select [iFax/Fax]
several times to display iFax in the
Recipient section.
2
Select the profile for setting each
feature as necessary.
3
Enter the e-mail address for the
recipient that will receive the e-mail as shown below.
FAX= 0312345678 /T33S=123 @myhost. example.com
FAX=
(fixed characters)
Example Fax number .................................................. 0312345678
F code (if necessary).................................... /T33S=123
Host name of the receiving machine ............ myhost
Domain name of the receiving machine ....... example.com
Note • If the hard disk of the machine becomes full during scanning of a document, a screen
• If the hard disk of the machine becomes full during iFax transmission, the transmission is
Forwarding Documents Stored in a Mailbox
The following describes the feature to automatically forward fax documents stored in a
mailbox, as e-mail attachment.
Fax documents sent to mailboxes using the fax signal method (proprietary
communication procedures), F Code method or DTMF method, and fax documents
stored in mailboxes by the Box Selector feature can be forwarded as e-mail
attachments.
Important • This feature can only be used when the mail receiving protocol is SMTP.
For information on the mailbox forwarding settings, sending to mailboxes, using the Box Selector to
receive documents in a mailbox, and printing or deleting documents received in a mailbox, refer to
"Printing/Deleting Documents in the Mailbox" (P.208).
Forwarding iFax
The machine can automatically forward fax documents received in a mailbox or fax
documents stored in a mailbox by the Box Selector feature to the forwarding address
specified for the mailbox as e-mail.
apply to the communication mode used between the fax gateway and the fax machine.
Transfer Maximum Data Size] in the system setting.
Fax number of
the recipient
appears to prompt you to select whether to send the job up to the stored pages or to cancel
the job. Choose one of the processes.
cancelled and the document data is deleted.
/T33S= (fixed @ + host name of
characters) and F the machine that
code (for specifying converts and sends
the F code) the received e-mail
as a fax.
About Internet Fax
Domain
name
4
119