Fuji Xerox ApeosPort-II C4300 User Manual page 324

10 System Settings
If [Auto Print] is enabled, prints out only when the e-mail has its contents.
Incoming iFax Output Destination
Set the output tray to be used for printed iFax documents.
Note
Fax Transfer from Address Book
Set whether to set restrictions when forwarding e-mail received in SMTP format by iFax to fax
addresses not in the address book.
Off
Forwarding is not restricted.
On
Checks if the forwarding fax number is listed in the address book, and if not, refuses the
received e-mail and destroys the data.
Fax Transfer - Add Sender Header
When forwarding received e-mail from iFax to fax, select whether to add a send header (start
time, sender name, recipient name, G3 ID, and number of pages).
Fax Transfer Maximum Data Size
When sending a received e-mail from iFax to a fax, set the maximum data size.
Off
No limit on data size.
On
Specify a value within the range from 1 to 65,535 KB, in 1 KB increments. If a data size
exceeds the specified value, the data is discarded.
10
322
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.