No Dot1X Timeout; Dot1X User; No Dot1X User; Users Defaultlogin - D-Link DES-3226L Cli Command Reference

no dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator state machine on this
port to the default values. Depending on the token used, the corresponding default values are set.
Format
Mode

dot1x user

This command adds the specified user to the list of users with access to the specified port or all ports.
The <user> parameter must be a configured user.
Format
Mode

no dot1x user

This command removes the user from the list of users with access to the specified port or all ports.
Format
Mode

users defaultlogin

This command assigns the authentication login list to use for non-configured users when attempting to
log in to the system. This setting is overridden by the authentication login list assigned to a specific user
if the user is configured locally. If this value is not configured, users will be authenticated using local
authentication only.
Format
Mode

users login

This command assigns the specified authentication login list to the specified user for system login. The
<
user>
If the user is assigned a login list that requires remote authentication, all access to the interface from all
CLI, web, and telnet sessions will be blocked until the authentication is complete.
Note that the login list associated with the 'admin' user can not be changed to prevent accidental
lockout from the switch.
Format
Mode
no dot1x timeout {reauth-period | quiet-period | tx-period |
supp-timeout | server-timeout}
Interface Config
dot1x user <user> {<slot/port> | all}
Global Config
no dot1x user <user> {<slot/port> | all}
Global Config
users defaultlogin <listname>
Global Config
must be a configured <
user>
users login <user> <listname>
Global Config
Access and Security Commands
and the < must be a configured login list.
listname>
91