Initialize Port-Based Port(S) - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
Time Interval
Click the OK button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings window
before initializing ports. Information in this window cannot be viewed before enabling the authentication
mode to either Port-based or MAC-based.

Initialize Port-based Port(s)

This window is used to display the authenticator diagnostics information.
To view this window, click Security > 802.1X > Initialize Port-based Port(s) as shown below:
The fields that can be configured are described below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-17 Authenticator Diagnostics window
Description
Use the drop-down menu to select the interval to update the statistics.
Figure 8-18 Initialize Port-based Port(s) window
217