6: Manage Lamp Information; Create A New Lamp File; Modify An Existing Lamp File; Enable Or Disable Liteloc On A Lamp File - Christie Solaria One User Manual

6 Manage Lamp Information
6.1

Create a New Lamp File

1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Complete these fields:
Field
Power%
Enable LiteLOC™
Light Meter - Set Target
Amps
Volts
Watts
~fL or ~cd/m
Hours
Intensity
3. Tap Save As.
4. Enter a name for the lamp file in the Filename field.
5. Tap OK.
6.2

Modify an Existing Lamp File

1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Select a lamp file in the Current Lamp File list.
3. Modify the lamp file settings.
4. Tap Save. If you want to revert your changes, tap Revert before you tap Save.
6.3

Enable or Disable LiteLOC on a Lamp File

LiteLOC™ is a power control algorithm that increases the power level to maintain lamp brightness as the lamp
ages.
1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Select a lamp file in the Current Lamp File list.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
Description
The percentage of power to supply to the lamp.
Enables or disables LiteLOC
algorithm that increases the power level to maintain lamp brightness
as the lamp ages.
Enables LiteLOC
long as possible. The Light Meter value is an arbitrary unit of
measure, not lumens or fL.
Lamp current in amperes.
Lamp voltage in volts.
Lamp power in watts.
2 Approximate Foot Lamberts reading on the light sensor. This
assumes a calibration was performed.
Number of hours the current lamp has operated.
The current light sensor reading in arbitrary units-of -measure and
does not represent actual lumens or fL.
™ . LiteLOC™ is a power control
and maintains the current brightness level for as
™
6-1