Download A Backup File; Delete A Christie Imb Backup File; Work With Configuration Files; Load A Reald 3D Eq Configuration File - Christie Solaria One User Manual

13.5.3

Download a Backup File

1. Insert a USB flash drive in the USB port on the side of the touch panel controller (TPC).
2. Tap Menu > Christie IMB > System.
3. Tap General > Backup/Restore.
4. Select a file in the Restore Files on Server list.
5. Tap Download.
13.5.4

Delete a Christie IMB Backup File

1. Tap Menu > Christie IMB > System.
2. Tap General > Backup/Restore.
3. Select a file in the Restore Files on Server list.
4. Tap Delete.
5. Tap Yes.
6. Tap OK.

13.6 Work with Configuration Files

You use configuration files to modify the behavior of third-party software instructions supported by the
Christie IMB. Use the procedures in this section to load a modified or default configuration file.
13.6.1

Load a RealD 3D EQ Configuration File

1. Insert a USB flash drive with the RealD 3D EQ configuration file into the USB port on the side of the
touch panel controller (TPC).
2. Tap Menu > Christie IMB > System.
3. Tap General > Config Files.
4. Tap Load Config File in the RealD 3D EQ area.
5. Select a drive and browse to the location of the correction file.
6. Select the correction file.
7. Tap Accept.
13.6.2

Load a Default RealD 3D EQ Configuration File

This procedure overwrites modified RealD 3D EQ configuration files.
1. Tap Menu > Christie IMB > System.
2. Tap General > Config Files.
3. Tap Load Default Config in the RealD 3D EQ area.
4. Tap Yes.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
13-15