Refresh Nas Share Names; Configure Nas Ethernet Port Ip Addresses; Delete A Nas - Christie Solaria One User Manual

1. Tap Menu > Christie IMB > System.
2. Tap Storage.
3. Tap a NAS device in the NAS list.
4. Tap Test Performance.
5. Tap Change and select the test content.
6. Tap Start Test.
7. Tap Close.
8. Tap Cancel.
13.7.8

Refresh NAS Share Names

1. Tap Menu > Christie IMB > System.
2. Tap Storage.
3. Tap a NAS device in the NAS list.
4. Tap Refresh Share Names.
5. Tap OK.
6. Tap Save.
7. Tap OK.
13.7.9

Configure NAS Ethernet Port IP Addresses

You can configure the NAS1 and NAS2 ports on the Christie IMB to have static IP addresses. However, the
NAS device typically operates on a private Ethernet connection that is not part of the theatre network.
When setting the static IP value, you are setting the IP address for the NAS port on the Christie IMB. The static
IP address must be in the same subnet as the NAS device; it cannot be the same IP address as the NAS device.
1. Tap Menu > Christie IMB > System.
2. Tap IMB Network.
3. Tap Static IP.
4. Edit the settings.
5. Tap Save.

13.7.10 Delete a NAS

1. Tap Menu > Christie IMB > System.
2. Tap Storage.
3. Tap a NAS device in the NAS list.
4. Tap Delete.
5. Tap Yes.
6. Tap Save.
7. Tap OK.
13-18 Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)