4: Manage The Dlp; Stop Dlp Communication; Reset The Dlp; Run A Dlp Self Test - Christie Solaria One User Manual

4 Manage the DLP
This section provides procedures for managing the Integrated Cinema Processor (ICP) electronics. To access
the DLP menus, you need Administrator or Service permissions
4.1

Stop DLP Communication

It is recommended that you stop DLP communication when you perform DLP maintenance.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap Stop DLP Communication.
3. Tap Acknowledge.
4.2

Reset the DLP

To remove image artifacts from the screen, try resetting the DLP before restarting the projector. Do not reset
the DLP if content is playing.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap Reset DLP.
3. Tap Yes.
4. Tap Acknowledge if an alarm appears.
4.3

Run a DLP Self Test

Run a DLP self test to test the functionality of the Integrated Cinema Processor (ICP) and DLP.
1. Tap Menu > Diagnostics > DLP Management.
2. Tap DLP Self Test.
3. Tap Yes.
4. Tap Clear Results to close the Results pane.
4.4

Download an ICP Certificate

1. Insert a USB flash drive in the USB port on the side of the touch panel controller (TPC). If you do not
insert a USB flash drive, the ICP certificate is saved to the FTP root directory.
2. Tap Menu > Diagnostics > DLP Management.
3. Tap Download ICP Certificate.
4. Tap Close.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
4-1