Respond To Alarms; Turn The Projector Off - Christie Solaria One User Manual

3.8

Respond to Alarms

When an alarm occurs, an Alarms window with a red border appears with a description of the alarm condition,
state, and time and date of the alarm. The window only displays alarms you have not previously
acknowledged. To acknowledge an alarm and remove it from the Alarms window, click Acknowledge. To
view all alarms, tap Menu > Status > All Alarms in the left pane.
3.9

Turn the Projector Off

1. On the Touch Panel Controller (TPC), tap and hold the light bulb
2. On the TPC, tap and hold the red power
and electronics stay on for 10 minutes. After this cool down period, the projector enters standby mode.
3. If you are servicing the projector, or removing the protective cover, disconnect AC and turn the breaker
OFF.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
Section 3: Access the Projector and Run Diagnostics
icon. The projector enters a cool down mode and the fans
icon to turn the lamp off.
3-5