Screen Masking; Calibrate Screen Brightness (Fl) - Christie Solaria One User Manual

2.8

Screen Masking

You use masking to conceal the unused edges of a screen. These are the two most common types of screen
masking:
• Top Masking – Movable flat black panels or curtains are installed along the top edge of the screen. You raise
the curtain for flat images, and you lower the curtain for scope images.
• Side Masking – Movable flat black panels or curtains are installed on each side of the screen. You close the
curtain for flat images, and open the curtain and zoom for scope images.
Typically, you install top and side masking to allow a greater range of adjustment.
2.9

Calibrate Screen Brightness (fL)

1. Turn the lamp on and allow it to operate for 20 minutes.
2. On the touch pad controller, tap Menu > Administrator Setup > Foot Lamberts Calibration.
3. Complete the Foot Lamberts Calibration wizard.
2-8 Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)