5: Work With Channels; Create A New Channel - Christie Solaria One User Manual

5 Work with Channels
Create channels to store customized projector settings for different inputs. You can create a maximum of 64
channels.
5.1

Create a New Channel

You need Advanced, Administrator, or Service permissions to create or modify channel settings. You can
create a maximum of 64 channels.
1. Tap Menu > Channel Setup.
2. Select a channel in the Channel Name list.
3. Tap the Launch Dialog
4. Enter a name for the channel and tap Enter.
5. Complete these fields on the Config 1 screen:
Field
Icon
Input
Data Format
Source File
Screen File
Use PCF
PCF
Lamp File
6. Tap Config 2 in the left pane and then complete these fields:
Field
Measured Color
Target Color
Color Space
Gamma
LUT_CLUT
Scan Type
Automatic Scan Type
Detection
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
icon.
Description
The icon associated with the channel.
The location or connection for the current input.
The source color depth (8-10-12 bit) for the channel.
The resolution and aspect ratio for the channel.
The screen type, masking, cropping, and lens settings for the channel.
Associates the channel with a Projector Configuration File (PCF) and prevents
Channel adjustments.
The PCF file associated with the channel.
The lamp file associated with the channel. Tap the Launch Dialog icon to edit
the lamp file settings. Any changes made to the Lamp File settings are applied
to all channels that use this lamp file.
Description
The Measured Color Gamut Data (MCGD) file used to calculate target color
processing.
The Target Color Gamut Data (TCGD) value. This option is not available when
Use PCF is selected in the Config 1 screen.
The method of color decoding for the current source. The default is YCbCr for
all DVI sources. The default for all cinema sources is Unity RGB. This option is
not available when Use PCF is selected.
The gamma correction required for the proper tonal range of the source mate-
rial.This option is not available when Use PCF is selected.
Applies a 3D color cube for increased color accuracy. This option is not avail-
able when Use PCF is selected.
The video scan type. The default is Progressive.
Automatically performs scan type detection. This feature is supported for PIBS1
inputs only.
5-1