Adjust Lamp Power; Change The Lamp Power Percentage; View Lamp Information; Receive An Alarm When A Lamp Reaches Its Expiry Date - Christie Solaria One User Manual

3. Tap Enable LiteLOC to enable LiteLOC.
- or -
Clear the Enable LiteLOC check box to disable LiteLOC.
4. Tap Save.
6.4

Adjust Lamp Power

1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup
2. Increase or decrease the Power % value.
3. Tap Set Target.
4. Select Enable LiteLOC™.
6.5

Change the Lamp Power Percentage

Entering a new Lamp Power percentage temporarily disables LiteLOC settings.
1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Increase or decrease the Power % value.
6.6

View Lamp Information

To view information about the lamps previously installed in the projector:
Tap Menu > Advanced Setup > Lamp History.
6.7

Receive an Alarm when a Lamp Reaches Its Expiry Date

To receive an alarm when the lamp reaches its operational limit:
1. Tap Menu > Administrator Setup > Preferences.
2. Tap Lamp Expiry in the Alarm Triggers area.
6.8

Lamp Expiry Hours

This table lists the maximum hours projector lamps can operate before replacement:
6-2
Lamp Type
CDXL-14M (1.4 kW)
CDXL-16M (1.6 kW)
CDXL-21S1 (2.1 kW)
.
Expected Life
3500 hours
3500 hours
1500 hours
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)