Log On To The Projector; Activate Marriage; Add The Projector To A Network - Christie Solaria One User Manual

1.13

Log On to the Projector

1. On the touch panel controller (TPC), tap Menu > Login.
2. Select a user name in the Username list. To view the permissions associated with each account see
Access Permissions on page 10-1.
3. Enter your password.
4. Tap Login.
1.14

Activate Marriage

You must complete marriage to display encrypted content and to comply with Digital Cinema System
Specification (the DCI specification). You cannot complete marriage remotely. In addition, an authorized
employee must be physically present to verify that the anti-tamper seals on the card cage faceplate (A) and
firewall (B) are unbroken, the projector is unaltered, and to press the marriage button on the card cage
faceplate.
1. Log on to the projector with marriage permissions. See
1. Tap Menu > Service Setup > IMB Marriage.
2. Complete the Marriage wizard.
3. Click Finish.
1.15

Add the Projector to a Network

1. On the touch panel controller (TPC), tap Menu > Login.
2. Select an administrator account in the Username list.
3. Enter a password in the Password field and then tap Login.
4. Tap Menu > Administrator Setup > Communications Configuration.
5. Complete these fields:
Field
Device Name
IP Address
Subnet Mask
Gateway
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
A
Description
The name of the projector.
The IP address of the projector.
The subnet mask to which the address belongs.
The IP address for the network gateway.
B
Log On to the Projector on page 1-17.
User
1-17