9: View And Modify Projector Settings; Set Projector And Tpc Preferences; Adjust Projector Time Settings - Christie Solaria One User Manual

9 View and Modify Projector Settings
Use the procedures in this section to modify projector settings including the touch panel controller (TPC)
language, TPC screen brightness, and time settings.
9.1

Set Projector and TPC Preferences

You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Preferences.
2. Adjust these settings:
Field
Temperature Units
Image Orientation
Luminance Units
Language
Beep on Screen Press
Enable Screen Saver / Screen
Saver Delay
Over Temperature, Fan Failure,
Lamp Rotation, Lamp Expiry,
Brightness
Calibrate Screen
IMB Powered in Standby Mode
9.2

Adjust Projector Time Settings

You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Time Setup.
2. Adjust these settings:
Field
Time Zone
24 Hour Time
Adjust for Daylight Savings Time
Time Offset
Apply Time Adjustment
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
Description
Display temperature information in Celsius or Fahrenheit.
The direction of the on screen image.
Display luminance information in Foot Lamberts or Candela.
The language for the TPC and online help.
When selected, a sound plays when you tap the TPC screen.
Enables a screen saver and determines the frequency that the screen saver
appears.
Opens an alarm window when a pre-defined event occurs.
Adjusts the brightness of the touch screen display.
Opens the Calibrate window and starts the TPC calibration.
When selected the Christie IMB remains on when the projector enters
standby mode.
Description
The time zone where the projector is installed.
Displays time in a 24-hour format.
Automatically adjusts the time for daylight savings.
Increases or decreases the projector time.
Applies time adjustment settings.
9-1