Color Calibration - Christie Solaria One User Manual

3. Insert a hex driver in the first set screw (A) and a hex driver in the first cap screw (B).
4. Equally turn the set screw (A) and cap screw (B) in opposite directions until the black corner is removed.
5. If the black corner remains, insert a hex driver in the second set screw (C) and a hex driver in the second
cap screw (D).
6. Equally turn the set screw (A) and cap screw (B) in opposite directions until the black corner is removed.
7. Replace the top lid.
2.7

Color Calibration

Create Measured Color Gamut Data (MCGD) files to correct on-screen colors. A colorimeter is required to
complete this procedure. Measure the colors displayed on the screen from the center of the audience viewing
location. See Create a MCGD File on page 7-2.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
A Set Screw (x2)
B Cap Screw (x2)
C Set Screw (x2)
D Cap Screw (x2)
2-7