Manage Lamp Information; Create A New Lamp File; Modify An Existing Lamp File - Christie CP2215 User Manual

Manage Lamp Information

This section provides information and procedures for optimizing lamp performance. Optimizing lamp
performance is recommended to make sure you receive the brightest, most uniform image possible
for the life of the lamp.

Create a New Lamp File

1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Complete these fields:
Field
Power%
Enable LiteLOC™
Light Meter - Set Target
Amps
Volts
Watts
~fL or ~cd/m
Hours
Intensity
3. Tap Save As.
4. Enter a name for the lamp file in the Filename field.
5. Tap OK.

Modify an Existing Lamp File

1. Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup.
2. Select a lamp file in the Current Lamp File list.
3. Modify the lamp file settings.
4. Tap Save.
To revert your changes, tap Revert before you tap Save.
CP2215 User Manual
020-101225-01 Rev. 1 (01-2014)
The percentage of power to supply to the lamp.
Enables or disables LiteLOC
algorithm that increases the power level to maintain lamp
brightness as the lamp ages.
Enables LiteLOC
for as long as possible. The Light Meter value is an arbitrary
unit of measure, not lumens or fL.
Lamp current in amperes.
Lamp voltage in volts.
Lamp power in watts.
Approximate Foot Lamberts reading on the light sensor. This
2
assumes a calibration was performed.
Number of hours the current lamp has operated.
The current light sensor reading in arbitrary units-of -measure
and does not represent actual lumens or fL.
Description
™
. LiteLOC™ is a power control
™
and maintains the current brightness level
41