Nas Requirements; Ethernet Port; Esata; Usb 1 Port - Christie Solaria One User Manual

A.10.5 NAS Requirements
The network-attached storage (NAS) device must meet these minimum requirements:
• 1 TB storage space or greater
• Capable of running RAID 5
• Gigabit Ethernet connectivity
• Network File System (NFS)
A.10.6 Ethernet Port
Interface: 10-Base-T/100-Base-T/1000-Base-T
Connector: Female RJ-45
Bit Rate: 1000 Mbps
A.10.7 eSATA
Interface: SATA revision 2.0
Connector: eSATA
Bit Rate: 3.0 Gbps
A.10.8 USB 1 Port
Interface: Universal Serial Bus 2.0
Connector: USB Device Standard Sizes (Series "A")
Maximum Bit Rate: 480 Mbps
A.10.9 AES3 Audio Output
Interface: AES3 Digital Audio
Connector: 25-pin subminiature D, female
Pin-Out: Conforms to SMPTE / TASCAM pinout. For AES3 PIN mapping, see
A-7.
A.10.10 Security Policy
In accordance with the requirements of Federal Information Processing Standard (FIPS) 140-2, a security
policy has been defined and published for the Christie IMB. This security policy identifies the ports and
interfaces available on the device, the roles and services provided, and the critical security parameters
protected by the Christie IMB. All users of the Christie IMB must abide by the requirements defined by the
Christie IMB security policy. The Christie IMB security policy is available on the National Institute of
Standards and Technology (NIST) web site (http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/
1401val2012.htm).
A-8
24 Ch 1 & 2 plus
25 GND
O
Ground
AES3 Port PIN Map on page
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)