Remove A Global Trigger; Manage Audio Settings; Map Channels; Map Speakers - Christie Solaria One User Manual

13.8.15 Remove a Global Trigger

1. Tap Menu > Christie IMB > System.
2. Tap Automation > Global Triggers.
3. Tap a global trigger in the list.
4. Tap Remove.
5. Tap Yes.
6. Tap Save.

13.9 Manage Audio Settings

To set your audio settings, complete these tasks:
• Map the channel output to a specific speaker. See
• Enter a name for each speaker, and then associate it with a specific AES output. See
13-23.
13.9.1

Map Channels

1. Verify the digital cinema audio processor is connected to the AES3 port on the Christie IMB.
2. Tap Menu > Christie IMB > System.
3. Tap Audio > Channel Mapping.
4. Select a surround sound type in the Mapping list.
5. Select a channel in the Channel list for each of the speakers in your set up.
6. Tap Save.
13.9.2

Map Speakers

1. Verify the digital cinema audio processor is connected to the AES3 port on the Christie IMB.
2. Tap Menu > Christie IMB > System.
3. Tap Audio > Speaker Mapping.
4. Select a delay in milliseconds in the Delay (ms) list.
5. Select an audio rate from the Audio Rate list.
6. Enter the name of the speaker that corresponds to the AES output number in the Speaker Name field.
7. Select a speaker in the Speaker Test list and then tap Test to test the speaker mapping. A tone emits from
each speaker that you mapped.
8. Tap OK to stop speaker testing.
9. Tap Save.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
Map Channels on page 13-23.
Map Speakers on page
13-23