Christie Imb - Christie Solaria One User Manual

Inconsistent Picture Quality
• Verify the quality of the signal from the input source.
During playback, flashes of light appear on the screen
There might be insufficient bandwidth to stream content from the NAS or DAS device to the Christie IMB. To
correct this issue:
• Test your NAS device to determine if it can maintain the required bandwidth to stream content to the
Christie IMB. See
• Change the file system protocol on the NAS device to Network File System (NFS).
• Verify that the NAS device is connected directly to the Christie IMB NAS port.
• Verify that no other devices are connected to the Christie IMB NAS port.
16.4

Christie IMB

Play 3D Content at Frame Rates Higher than 30 frames per second (FPS)
A license is required to play high frame rate 3D content. To determine if you have a 3D license, tap Christie
IMB > System > Licenses. If you have a 3D license, it appears in the licenses list.
My hard drive is not detected when I ingest content
The file system might be corrupted. To resolve a corruption issue, connect the device containing the content
you want to ingest to a personal computer (PC) and run a file system check.
Ingest drives can contain Microsoft Windows (FAT, NTFS) or Linux (ext3, ext4) file systems.
What is my Christie IMB serial number?
Tap Menu > Christie IMB > System > Status. Tap System in the Category list. The serial number appears in
the SM Serial Number field.
You can also find the serial number on the Christie IMB AES3 connector. The 12-digit serial number begins
with the prefix eSN.
I cannot complete IMB marriage
Verify:
• All card cage faceplate screws are properly secured.
• The security door is on and it is locked.
Unload all content:
• Tap Menu > Christie IMB > Control.
• Tap the Unlock icon.
• Tap Unload Content.
16-4
Test NAS Performance on page 13-17.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)