Load A Reald 3D Eq Configuration File; Play Content - Christie Solaria One User Manual

9. If the test pattern is focused and centered on the screen you do not need to complete further image
adjustment. If the image is not focused and centered on the screen, complete one of these procedures:
a. See Correct Keystone Effect on page 2-1
b. See Correct Vignetting on page 2-3
ter than it is at the sides.
c. See Fold Mirror Adjustment on page 2-6
d. See Adjust Vertical Boresight Angle on page 2-3
screen with a focus adjustment.
e. See Adjust Horizontal Boresight on page 2-4
required.
1.21

Load a RealD 3D EQ Configuration File

You need to install the RealD 3D EQ Configuration File if you are using RealD technology to display 3D
content. If you are not using a RealD technology to display 3D content, do not complete this procedure.
1. Insert a USB flash drive with the RealD 3D EQ configuration file into the USB port on the side of the
touch panel controller (TPC).
2. Tap Menu > Christie IMB > System.
3. Tap General > Config Files.
4. Tap Load Config File in the RealD 3D EQ area.
5. Select the configuration file.
6. Tap Accept.
1.22

Play Content

After installing and configuring the projector, these are the tasks that you typically complete to play content:
a. Ingest the content. Content is typically provided on a hard drive sent by your movie distributor. To
ingest content, see
b. Ingest the Key Delivery Message (KDM) key. A KDM key is not required for trailers and other
unencrypted content. The KDM key is typically sent separately from the encrypted content on a USB
flash drive. See
c. Verify the content plays correctly and the KDM is correct. See
d. Create a play list. A play list is a list of content files including trailers, features, and automated events
that play in an order that you define. See
e. Verify the play list plays correctly. See
f. Optionally schedule playback or add automation to a play list:
•To learn more about scheduled playback, see
•To add automation, see
1-22
or Align the Lamp on page 1-18
Ingest Content on page
Ingest Content on page
Content Management on page
Manage Automation on page
if the image appears distorted and resembles a trapezoid.
if a corner or edge of an image is missing.
if the image cannot be focused uniformly on the
if a large horizontal angular offset to the screen is
13-4.
13-4.
Content Window Icons on page
Play Lists on page 13-5.
Schedule Views on page
13-19.
if the image is brighter at the cen-
13-1.
13-9.
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
13-2.