7 Manage Projector Setting Files
7.1
Create a Source File
Create source files to store resolution, offset, and aspect ratio settings for input devices
1. Tap Menu > Advanced Setup > Source File Setup.
2. Tap Save As.
3. Enter a name for the source file in the Filename field.
4. Tap OK.
5. Enter values in these areas:
Area
Resolution
Offset
Aspect Ratio
6. Tap Save.
7.2
Modify a Source File
1. Tap Menu > Advanced Setup > Source File Setup.
2. Select a source file in the Current Source File list.
3. Modify the Resolution, Offset, or Aspect Ratio values.
4. Tap Save.
7.3
Create a Screen File
Use screen files to define the size of the display panel and image cropping. You can assign the same screen file to multiple
input devices.
1. Tap Menu > Advanced Setup > Screen File Setup.
2. Tap Save As.
3. Enter a name for the source file in the Filename field.
4. Tap OK.
5. Complete these fields:
Solaria One User Manual
020-100841-02 Rev. 1 (11-2012)
Description
The X and Y resolution of the incoming signal. For example, 2048 (X) and 858 (Y) or
1920 (X) and 1080 (Y). The resolution must match the incoming signal format.
The amount of incoming data to discard. Set the values to zero to process all incoming
data. The allowable X range is -4096 to 4096 pixels and Y range of -2160 to 2160
pixels.
The aspect ratio for the incoming signal. The allowable range is 0 to 7.99.
Field
Description
Letter Box
All image data is displayed and the aspect ratio is maintained.
.
7-1