Ip Media Parameters - AudioCodes Mediant 500 E-SBC User Manual

Enterprise session border controller digital voip media gateway
Hide thumbs Also See for Mediant 500 E-SBC:
Table of Contents

Advertisement

User's Manual
Parameter
[SASRegistrationManipulation]
Web: SAS IP-to-IP Routing Table
[IP2IPRouting]

53.13 IP Media Parameters

The IP media parameters are described in the table below.
Parameter
Web: Number of Media Channels
EMS: Media Channels
CLI: media-channels
[MediaChannels]
Web: NetAnn Announcement ID
[NetAnnAnncID]
Version 6.8
format of this table parameter is as follows:
[SASRegistrationManipulation]
FORMAT SASRegistrationManipulation_Index =
SASRegistrationManipulation_RemoveFromRight,
SASRegistrationManipulation_LeaveFromRight;
[\SASRegistrationManipulation]
For example, the manipulation rule below routes an INVITE with
Request-URI header "sip:7184002@10.33.4.226" to user
"4002@10.33.4.226" (i.e., keep only four digits from right of user
part):
SASRegistrationManipulation 0 = 0, 4;
This table parameter configures the IP-to-IP Routing table for
SAS routing rules. The format of the ini file table parameter is as
follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions;
[\IP2IPRouting]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, -1, -1, , 0, -1, 0;
Table 53-64: IP Media Parameters
Defines the maximum number of DSP channels allocated for
various functionalities such as transcoding, IP conferencing,
The default is 0.
Notes:
For this parameter to take effect, a device reset is required.
The SBC application does not require DSP channels. The
SBC application uses DSP channels only if media
transcoding is needed, where two DSP channels are used
per transcoding session.
Other DSP channels can be used for PSTN interfaces.
Defines the NetAnn identification string (up to 16 characters) for
playing an announcement using the NetAnn interface. The
application server sends a regular SIP INVITE message with a
SIP URI that includes this identifier string and a "play="
parameter that identifies the necessary announcement. The
default is 'annc'.
877
53. Configuration Parameters Reference
Description
Description
Mediant 500 E-SBC

Advertisement

Table of Contents
loading

Table of Contents