Related Documentation - AudioCodes MP-112 Hardware Installation Manual

Related Documentation

SIP Release Notes
MP-11x & MP-124 SIP User's Manual
MP-11x SIP Fast Track Guide
Notes and Warnings
Warning:
installing the device.
Warning:
INDOORS.
Warning:
with AudioCodes' approved surge protector (Circa model 4B3S-75) and proper
installation and grounding. When done correctly, the installation will meet ITU-T K.21
basic level. For more information, see Section 5.1 on page 23.
Warning:
not exit the building.
Do not open or disassemble this device. The device carries high voltage and contact
with internal components may expose you to electrical shock and bodily harm.
Warning:
qualified service personnel.
Warning:
the telephone network cabling.
Hardware Installation Manual
Document Name
Read and adhere to all warning statements in this document before
The MP-1xx device is an indoor unit and therefore, must be installed only
Routing of FXS telephony cables outdoors can be done only in conjunction
The Ethernet port interface cabling must be routed only indoors and must
Caution Electrical Shock
The device is supplied as a sealed unit and must only be serviced by
Before servicing the device, disconnect the device from the mains and from
6
MP-11x
Document #: LTRT-59824