Function Select: Utility: System: Fpga Firmware; Function Select: Utility: System: Demo Mode; Ext Agc: Max Pwr - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Front Panel Operation

FUNCTION SELECT: UTILITY: SYSTEM: FPGA FIRMWARE

Displays the FPGA module firmware version.
Press <ENTER> to display includes the month, day, and year.
Note: This menu is displayed only when the Turbo option is installed.
Displays the Turbo module firmware version.

FUNCTION SELECT: UTILITY: SYSTEM: DEMO MODE

Displays the status of the Demo Mode as either On or Off. Enables all the FAST options for the
hardware installed for 1 hour.
FUNCTION SELECT: UTILITY: SYSTEM: EXT AGC: MAX PWR
Sets the AGC voltage for a RX signal. The voltage range is 0.0 to 10.0V, in 0.5V steps.
Upon entry, the current external AGC voltage level is displayed. Press [↑] or [↓] to increment or
decrement the AGC voltage level in 0.5V steps. Press <ENTER> to execute the change.
FPGA FIRMWARE
FW/NNNNNN-DDR
FPGA FIRMWARE
MM/DD/YYYY
TURBO FIRMWARE
FW/NNNNR
DEMO MODE
OFF
EXT AGC: MAX PWR
0.0 Volts
4–83
Revision 1
MN/SNM1001L.IOM