Tx-If Output - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Front Panel Operation
FUNCTION SELECT: CONFIGURATION: MODULATOR:

TX-IF OUTPUT

Programs the modulator output On or Off. Upon entry, the current status of the output is
displayed. Press [↑] or [↓] to make the selection. Press <ENTER> to execute the change.
FUNCTION SELECT: CONFIGURATION: MODULATOR:
TX POWER LEVEL
Programs the modulator output power level from 0 to -40 dBm
Upon entry, the current transmitter power level is displayed with the flashing cursor on the first
character. Press [↑] or [↓] to increase or decrease the output power level in 0.1 dBm steps. Press
<ENTER> to execute the change.
This menu appears when:
Notes:
1.
2.
TX-IF OUTPUT
TX POWER LEVEL
- 10.0 dBm
TX POWER LEVEL
-10.0 dBm (ADJ)
1. ODU Power Leveling is On (Utility: Outdoor Unit), or
2. The MOD Power Offset (Utility: Modulator is ≠ 0 dB.).
3. (ADJ) appears after the power level in the TX Power Level screen when this menu is
active.
When Power Leveling is Enabled, manual changes to the output level are inhibited, and
the menu indicates the TX Power Level TX by the modulator.
When MOD power offset is active the output power is adjusted [↑] and [↓] with arrow
keys. However, the value indicated in the display is:
Modulator Power Level + Offset
OFF
4–11
Revision 1
MN/SNM1001L.IOM