Modem Type - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Front Panel Operation
4.3.6.7 FUNCTION SELECT: UTILITY: MODEM TYPE
Select information to view using the [←] [→] arrow keys, then press <ENTER>.
FUNCTION SELECT: UTILITY: MODEM TYPE: MODEM TYPE
Several selections from this menu require optional hardware and software.
(Also, refer to Chapter 5.)

Modem Type

Custom
EFD
AUPC
When the modem is changed from one type of operation to another, the modem will be reset to
the default configuration of the new modem type. The RF-IF Output shall be tuned On to get the
modem to lock.
•
•
•
CAUTION
MODEM TYPE
MODEM TYPE
Access to all modems. Use caution, incompatible configuration parameters are
possible.
Closed Network operation
AUPC – The TX and RX Reed-Solomon cards. Provides AUPC operation only and No
ASYNC channel.
If the existing modem type is the same as the type entered, the modem will not change
any parameters.
If the modem type is changed to Custom, No parameters will be changed.
If the modem will not allow the modem type selection, that type of operation may not be
an available option. Select MODEM OPTIONS and OVERHEAD OPTIONS to locate
which modem operations are allowed.
Use caution when modifying the Custom Type. This type accepts all changes
to the modem, including incompatible parameters changes. Only
experienced modem operators familiar with all the controls shall use Custom
type.
UTILITY
CUSTOM
Description
4–85
Revision 1
MN/SNM1001L.IOM