Function Select: Remote Aupc (Conditional) - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Front Panel Operation
4.3.5

FUNCTION SELECT: REMOTE AUPC (CONDITIONAL)

IMPORTANT
To view or change the Remote AUPC functions, enter the Remote AUPC menu from the Function
Select menu on the front panel. After entering the Remote AUPC menu, press [
the Configuration or Monitor menu. Enter the selected menu by pressing [ENTER]. Press [
[ ] to view the selected configuration parameters.
→
FUNCTION SELECT: REMOTE AUPC: CONFIGURATION
(CONDITIONAL)
IMPORTANT
FUNCTION SELECT
REMOTE AUPC
Conditional: This menu is available when AUPC selection is made from
the Modem Type menu, located under the Utility: Modem Type menu.
Requires the Reed-Solomon Card with AUPC option.
REMOTE AUPC
CONFIGURATION
Conditional: This menu is available when either the ASYNC or AUPC
selection is made from the Modem Type menu, located under the
Utility: Modem Type menu.
Requires the Reed-Solomon Card with AUPC option.
4–54
Revision 1
MN/SNM1001L.IOM
] or [ ] to select
← →
] or
←