Index - Comtech EF Data SNM-1001L Installation And Operation Manual

8-PSK Decoding, A-27
8-PSK Encoding, 1-8, A-12
AC power Connector, 3-11
Acquisition Time, A-22, C-10
Acquisition Probability, C-10
Activation Procedures, 12-2
AGC Output, A-23
Alarms Connector and Pinouts (J10), 3-10
Asymmetrical Loop Timimg, 11-1
AUPC, 10-1
AUPC - Between Two Modems, 10-4
AUPC with Reed-Solomon Option, A-32
AUPC Modem Defaults, 10-8
AUPC Operation, 5-2
AUPC Parameters, A-32
AUPC Specification, A-31
Automatic Uplink Power Control, B-12
Auxiliary 1 Connector and Pinouts (J9), 3-9
BER Threshold, A-21
BPSK Bit Ordering, A-9, A-15
BPSK Encoding, 1-7, A-11
Baseband Loopback Operation, 10-7
Bit Error Rate Performance, A-19
BPSK Encoding, 1-7
Buffer Centering, A-25
Buffer Operation, 10-6
Buffer Size, 6-2
Buffering, 6-2
Burst Mode, C-1, C-7
Burst Mode Demodulator: Theory of Opoeration, C-7
Burst Mode Demodulator: Specifications, C-8
A
B
i-i
Burst Mode Modulator: Specifications, C-2
Burst Mode Modulator: Theory of Operation, C-1
Burst Mode Specifications, C-17
Burst Mode System - Specifications, C-11
Channel Spacing/Adjacent Carrier Performance, C-10
Clocking Options, 6-1
Closed Network Operation, 5-2
Coding, 7-2
Collision Recovery, C-11
Comparison of all TPC Modes, 7-4
Compatibility, 1-5
Comtech EF Data Part Numbers, 1-3
Command/Response, B-3
Command Message Structure, 13-2
Common Equipment Faults, 9-7
Configuration Commands/Responses, B-5
Connector Description, 3-2
Connector Overview, 3-1
Converting Between Bits and Seconds, 6-9
Custom Modem Defaults, 4-97
Custom Operation, 5-3
Data I/O Interface Connector (J8), 3-5
Data I/O Interface Connector (J8) Removal/Installation, 2-8
Decoder, 14-1
Decoding, A-26
Deinterleaver, A-15
Demodulator and FEC Decoding Types, A-14, C-8
Demodulator Channel Spacing/Adjacent Carrier
Performance, A-18
Demodulator Checkout, 8-5

Index

C
D