Function Select: Utility: Interface: Rx Data Phase; Function Select: Utility: Interface: Cts Delay - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Front Panel Operation

FUNCTION SELECT: UTILITY: INTERFACE: RX DATA PHASE

RX data phase relationship. Use this option to select Normal or Invert for the RX data relationship to
the selected RX clock.

FUNCTION SELECT: UTILITY: INTERFACE: CTS DELAY

Sets the delay in seconds (0 to 60) for the Clear To Send (CTS) signal to become active after RTS is
applied.
4.3.6.5 FUNCTION SELECT: UTILITY: OUTDOOR UNIT (CONDITIONAL)
IMPORTANT
RX DATA PHASE
NORMAL
CTS DELAY
0 SECONDS
UTILITY
OUTDOOR UNIT
Conditional: This menu is available only when ODU Power Supply, FSK,
and TX-IF Output are On.
4–76
Revision 1
MN/SNM1001L.IOM