Comtech EF Data SNM-1001L Installation And Operation Manual page 119

SNM-1001L Satellite Modem
Front Panel Operation
FUNCTION SELECT: REMOTE AUPC: CONFIGURATION:
AUPC ENABLE (CONDITIONAL)
IMPORTANT
Programs the AUPC feature On or Off at the far end of the link. This requires that modems at both
ends of the link are locked to function. This program is for control or last known status.
FUNCTION SELECT: REMOTE AUPC: CONFIGURATION:
B-BAND LOOP BACK (CONDITIONAL)
IMPORTANT
Programs the remote baseband loopback On or Off at the far end of the link. Modems at both
ends of the link shall be locked.
Note: This program is for control or last known status.
AUPC ENABLE
Conditional: This menu is available the AUPC selection is made from
the Modem Type menu, located under the Utility: Modem Type menu.
Requires the Reed-Solomon Card with AUPC option.
B-BAND LOOP BACK
Conditional: This menu is available when AUPC selection is made from
the Modem Type menu, located under the Utility: Modem Type menu.
Requires the Reed-Solomon Card with AUPC option.
OFF
OFF
4–55
Revision 1
MN/SNM1001L.IOM