Function Select: Monitor: Corrected Ber; Function Select: Monitor: Receive Signal - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Front Panel Operation

FUNCTION SELECT: MONITOR: CORRECTED BER

Displays the current corrected BER or "No Data" (if carrier is not locked).
Range: 1.0 E-3 to 1.0 E-12.
Notes:
1. Low limit is based on performance.
2. High limit is 1.0 E-12.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement the
selected kbps. Press <ENTER> to execute the change.
FUNCTION SELECT: MONITOR:EB/NO
Displays the current E
Range: 2.0 to 16.0 dB.
Notes:
1. Low limit is based on the data rate.
2. High limit is 16.0 dB.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement the
selected kbps. Press <ENTER> to execute the change.

FUNCTION SELECT: MONITOR: RECEIVE SIGNAL

CORRECTED BER
4.0 E-3
EB/NO
16.0 dB
/N or "No Data" (if carrier is not locked).
b 0
RECEIVE SIGNAL
-45.0dBm
4–39
Revision 1
MN/SNM1001L.IOM