Comtech EF Data SNM-1001L Installation And Operation Manual page 307

SNM-1001L Satellite Modem
Remote Control Operation
Bulk Consol.
Status
(continued)
Parameter
Number
107
108
109
110
(Note 3) 111
112
(Note 4)
113
(Note 3)
114
(Note 4)
115
116
117
118
119
120
(Note 8)
121
thru
124
Parameter Name
(Command Reference)
RTS TX-IF Control Mode
(ref. 'RTSM_' command).
CTS Delay Time
(ref. 'CTSD_' command).
Carrier Only Mode
(ref. 'COM_' command).
IDR TX ESC Type
(ref. 'IDRT_' command).
IDR RX ESC Type
(ref. 'IDRR_' command).
IBS TX ESC Type
(ref. 'IBST_' command).
IBS RX ESC Type
(ref. 'IBSR_' command).
TX Reed-Solomon Interleave Value
(ref. 'TRSI_' command).
RX Reed-Solomon Interleave Value
(ref. 'RRSI_' command).
reserved null field.
reserved null field.
reserved null field.
TX 8PSK 2/3 IESS-310 Operation
(ref. 'T310_' command).
RX 8PSK 2/3 IESS-310 Operation
(ref. 'R310_' command).
Not Used.
Description
p107 = n, where 'n' is '0' (off) or '1' (on).
p108 = nn, CTS delay time in seconds.
p109 = n, where 'n' is '0' (OFF),'1' (CENTER-CW), '2'
(DUAL-CW), '3' (OFFSET-CW).
p110 = n, where 'n' is '0' (AUDIO), '1' (DATA).
p111 = n, where 'n' is '0' (AUDIO), '1' (DATA).
p112 = n, where 'n' is '0' (AUDIO), '1' (DATA).
p113 = n, where 'n' is '0' (AUDIO), '1' (DATA).
p114 = nn, Interleave value.
p115 = nn, Interleave value.
p119 = n, where 'n' is '0' (off) or '1' (on).
p120 = n, where 'n' is '0' (off) or '1' (on).
B–33
Revision 1
MN/SNM1001L.IOM