Comtech EF Data SNM-1001L Installation And Operation Manual page 157

SNM-1001L Satellite Modem
Front Panel Operation
FUNCTION SELECT: UTILITY: MODEM TYPE:
CONFIGURATION CODE – CARD #2 (CONDITIONAL)
IMPORTANT
Comtech EF Data-supplied code. Press <ENTER>
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
the digit at the flashing cursor. Press <ENTER> to execute the change. Entering this code enables
the corresponding modem option. To purchase an option, contact an Comtech EF Data marketing
representative for more information
CONFIGURATION
CODE – CARD #2
This menu appears only if the Overhead card is installed.
1)AAAAAAAAAA
2)AAAAAAAAAA
] or [ ] to move the flashing cursor. Press [
← →
4–93
Revision 1
MN/SNM1001L.IOM
] or [ ] to increment or decrement
↑ ↓