Function Select: Utility: Modulator: Tx Symbol Rate; Function Select: Utility: Demodulator - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Front Panel Operation
This command allows for enabling or disabling of the TX carrier output depending on the
described conditions. One application for command is the operation of demand network systems.

FUNCTION SELECT: UTILITY: MODULATOR: TX SYMBOL RATE

Status only: 4.800 to 2500 ksps. Provides symbol rate corresponding to the data rate, code rate(s),
modulation and overhead (framing) programmed into the modulator.
4.3.6.3

FUNCTION SELECT: UTILITY: DEMODULATOR

Select information to view using the [←] [→] arrow keys, then press <ENTER>.
TX SYMBOL RATE
64.000 Ksps
UTILITY
DEMODULATOR
4–66
Revision 1
MN/SNM1001L.IOM