Comtech Ef Data Part Numbers - Comtech EF Data SNM-1001L Installation And Operation Manual

SNM-1001L Satellite Modem
Introduction
Option
Turbo Codec
Asymmetrical Loop Timing (SCT)
AUPC (No ASYNC)
37-Pin Female D Connector
25-Pin Female D Connector
34-Pin Female V.35
50-Pin Female D Connector for use
Without Overhead card.
Primary Power: Auto-ranging AC 85 to
264 VAC
Primary Power: 48 VDC (Modem only,
No BUC)
ODU DC Power: 24V or 48V. Primary
input = AC Only
1.3

Comtech EF Data Part Numbers

PL/9066-3
PL/9066-2
PL/9066-1
PL/9066-5
PL/5727-1
PL/6031-1
PL/6167-1
PL/6032-1
PL/6284
PL/6285
PL/9394-1
PS/AC65W01P01
PS/DC-DC5V65W
KT/9567-2
KT/9567-3
Description/Comment
Requires Reed-Solomon Codec
removal.
Requires Reed-Solomon cards
EIA-422/EIA-449 Interface and
Mil-188-114
EIA-530 (RS-422), EIA-232 and V.35
"Winchester" Connector with V.35
Includes EIA-422, EIA-232, and V.35
Use with redundancy switches
100W @ 24V
150W @ 48V
Part No.
RX only IF 1.0 ppm
TX only IF 0.02 ppm
TX/RX IF 0.02 ppm
TX/RX IF 1.0 ppm
25-pin EIA-530
37-pin EIA-449
50-pin
34-pin
TX Reed-Solomon
RX Reed-Solomon
TX/RX Turbo
90-264 VAC Modem PS
-48 VDC Modem PS
90 – 264 VAC, 100W
BUC P/S, 24V, CE Mark
90 – 264 VAC, 150 W
BUC P/S, 48 VDC
Availability
Description
1–3
Revision 1
MN/SNM1001L.IOM
Install Option
Yes User
Yes FAST
Yes User or FAST
Yes User
Yes User
Yes User
Yes User
Yes Factory
Yes Factory
Yes Factory
Remarks
Use with internal reference LNBs.
Hardware limited version.
Hardware limited version
Full Duplex
Full Duplex (No BUCs)
Interface
Interface
Interface No Overhead
Interface V.35
Modem only
Modem only
24 VDC, 100W
AC BUC Power Supply
48 VDC 150 W
AC BUC Power Supply