Function Select: Remote Aupc (Conditional) - Comtech EF Data SDM-300L3 Installation And Operation Manual

SDM-300L3 Satellite Modem
Front Panel Operation
4.6.5

FUNCTION SELECT: REMOTE AUPC (CONDITIONAL)

IMPORTANT
To view or change the Remote AUPC functions, enter the Remote AUPC menu from the
Function Select menu on the front panel. After entering the Remote AUPC menu, press
[ ] or [
←
pressing [ENTER]. Press [
FUNCTION SELECT: REMOTE AUPC: CONFIGURATION
(CONDITIONAL)
IMPORTANT
FUNCTION SELECT
REMOTE AUPC
Conditional: This menu is available when either the ASYNC or AUPC
selection is made from the Modem Type menu, located under the
Utility: Modem Type menu.
Requires either the Overhead Card installed with the ASYNC/AUPC
option or the Reed-Solomon Card with AUPC option.
] to select the Configuration or Monitor menu. Enter the selected menu by
→
] or [
←
REMOTE AUPC
CONFIGURATION
Conditional: This menu is available when either the ASYNC or AUPC
selection is made from the Modem Type menu, located under the
Utility: Modem Type menu.
Requires either the Overhead Card installed with the ASYNC/AUPC
option or the Reed-Solomon Card with AUPC option.
] to view the selected configuration parameters.
→
4–79
Revision 1
MN/SDM300L3.IOM