Asynchronous Port Parameters - Digital Equipment MUXserver 100 Reference Manual

Table 6-1 Asynchronous Port Parameters
Parameter
Default
Options
Speed
9600
AUTOBAUD, 75,110,134.5,
(Note 1)
150,300,600,1200,
1800,2000,2400,4800,
9600, 19200, 192.K,
1200175, 75/1200,
2400/150, 150/2400
Data Bits 8
5,6,7 or 8
Parity NONE
NONE, EVEN, ODD
Stop Bits 1 1, 1.5, 2
(Note 2)
Flow Control
XON/XOFF XON/XOFF, DTR/DSR
Echo NO ECHO NO ECHO, LOCAL ECHO
Modem
NO MODEM MODEM CONTROL ON
(Note 3)
MODEM CONTROL OFF
Connected to TERMINAL HOST,
(Note 4) TERMINAL
NOTE 1
AUTOBAUD should not be used for asynchronous lines mapped to
a MUXserver 100. The AUTOBAUD option should only be used on
DECmux II to DECmux II connections and in such cases, is only
available if modem control is ON. AUTOBAUD of a line is accom-
plished by the entry of a <RETURN> as the first input character
to a port. The speed will then be fixed until the DECmux II unit is
initialized or the link is hung-up. AUTOBAUD will only operate
within the range 1200 to 19200 baud.
NOTE 2
The choice of 1.5 stop bits is limited in use to the combination in-
volving 5 data bits.
16 CHAPTER 6 OECmux II OPERATION