Table of Contents
Advertisement
Illegal Slots
Received
Duplicate Node
Count
Non-Circuit
Messages
Xmitted
Non-Circuit
Messages
Received
shows the number of LAT messages with an illegal slot
format received by the server.
shows the number of times a service node became
available with different Ethernet addresses.
shows the number of LA T messages transmitted that
were not associated with a circuit. This includes
messages exchanged to establish remote sessions and re-
mote requests.
shows the number of LAT messages received that were
not associated with a circuit. This includes messages
exchanged to establish remote sessions and remote
requests.
5.30 SHOW NODES
Use this command to display information about the service nodes in the server.
Nodes are authorized or unauthorized depending upon group code access. They
are reachable or unreachable depending upon whether they currently accept
connections from MUXserver 100 terminals.
You can interrupt a SHOW NODES display with [BREAK]. The local prompt
reappears.
Syntax:
SHOW NODES
[node-name]
where
node-name
[
ALL]
specifies the service node for which information is dis-
played.
If
you do not enter a node name, information ap-
pears for all authorized service nodes with REACHABLE
or UNKNOWN status.
If
you enter a node name, you re-
ceive a display with more detailed data about the speci-
fied node. The counters in this display apply to messages
exchanged between the MUXserver 100 and the specified
service node.
48
CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS
Advertisement
Table of Contents
