Show Services - Digital Equipment MUXserver 100 Reference Manual

5.34 SHOW SERVICES
Use this command to display information about the services you are authorized
to use while in service mode.
Nodes are authorized or unauthorized depending upon group code access. If at
least one authorized node offers a particular service, then you can use that
service.
Entering only the keywords SHOW SERVICES generates a one-line-per-service
display. The information includes service name, status, and service announce-
ment. Only those services with AVAILABLE or UNKNOWN status are
included.
You can interrupt a SHOW SERVICES display with [BREAK]. The local
prompt reappears.
Syntax:
where
SHOW SERVICES
[service-name]
[ALL]
service-name
displays a list of all nodes that supply the specified ser-
vice. Included in the display are each node's reachability
status, service announcement, and rating for dynamic
load balancing.
ALL
generates a one-line-per-service display. The information is
similar to that with SHOW SERVICES, except that ser-
vices with UNAVAILABLE status are also included. The
privileged SHOW SERVICES ALL command lists all ser-
vices, whatever their status, that are authorized for at
least one of the MUXserver 100 terminals.
Examples:
LOCAL> SHO SER ALL
LOCAL> SHO SER DEVELOP
56 CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS