Table of Contents
Advertisement
Example:
COM>MAPHELP
The letters under the ports show the mappings, ports with
the same letters map together.
Use "blank" to move to the right "backspace" or "delete"
to move to the left.
Any letter or number shows a mapping,
unused port.
Control-Z terminates input.
" "
shows an
each port must map to exactly one other port on _
different multiplexer, error messages will be given
for three or more occurrences of the same letter,
or if two ports on the same multiplexer are mapped
together, or if a port is mapped to nowhere.
5.18 MONITOR
COMMUN~CATIONS
Use this command to provide a continuously updated SHOW COMMUNICA-
TIONS display. This is a privileged command.
You can use it to monitor the composite links. Stop the display by typing any
character. The local prompt then appears.
Syntax:
MONITOR [COMMUNICATIONS]
Example:
LOCAL> MONITOR COMMUNICATIONS
NOTE
If
your terminal is a video terminal that supports ANSI escape se-
quences, set the terminal to TYPE ANSI for the optimal display of
the MONITOR COMMUNICATIONS command.
CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS
35
Advertisement
Table of Contents
