Save (Part Of The Communications Sub-Directory); Set Noprivileged - Digital Equipment MUXserver 100 Reference Manual

5.24 SAVE (Part of the Communications Sub-
directory)
This command is executed from the privileged mode communications sub-
directory (that is, in response to the COM> prompt). It writes the current set-
ting of the communications parameters into the MUXserver 100 permanent
data base.
It must be executed after any change of parameters made using the MAP or
SYSTEM commands. To transfer these parameters to the operational data
base, follow the SAVE command with the RESTART command.
Syntax:
SAVE
Example:
COM> SAVE
Normal Response:
COM> SAVE
Save Complete
COM>
5.25 SET NOPRIVILEGE
Use this command to set your terminal to non privileged status when it is in
privileged status.
Syntax:
SET NOPRIVILEGE
Example:
LOCAL> SET NOP
40 CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS