Table of Contents
Advertisement
For the Server Counters:
•
The Messages Retransmitted value should be less than 1/1000 of the
value for Messages Transmitted.
•
The Duplicates Received value should be less than 111 000 of the value
for Messages Received.
•
The values for Illegal Messages Rcv'd and Illegal Slots Rcv'd should
be O.
Counters in excess of these guidelines may indicate a network problem.
Contact your network manager and refer to Chapter 4, Section 4.5
(PROBLEMS INVOLVING SERVICE MODES).
3.2.2 Show Nodes
When you enter a specific node name in the SHOW NODES command, the
counter values for that service node appear in the display. The following guide-
lines apply:
•
The Messages Retransmitted value should be less than 1/1000 of the
value for Messages Transmitted.
•
The Duplicates Received value should be less than 111000 of the value
for Messages Received.
•
The value for Illegal Messages Rcv'd should be O.
If
the SHOW NODES data exceeds these guidelines, contact your network
manager.
The Status column in the SHOW NODES display can help you monitor the
use of service nodes. The status indicates how many terminal users are con-
nected to each node.
3.2.3 Show Server
You use the SHOW SERVER display when you define server characteristics.
You can also use it as a maintenance tool.
The display for the privileged SHOW SERVER command lists Server Status
and Software Status. It also identifies the load host and dump host.
The numbers for Server Status should be all zeros. A hardware error produces
non-zero values.
'10
CHAPTER 3 MANAGING AND MONITORING
Advertisement
Table of Contents
