Test (Part Of The Communications Sub-Directory) - Digital Equipment MUXserver 100 Reference Manual

Example:
COM> SYSTEM
For port A
Speed [9600]??
Options: 1200,2400,4800,9600,9.6K,19200,19.2K,38400,38.4K
Speed [9600]?19.2K
Long line driver [NO]??
For port B
Speed [9600]?
Long l;ne driver [NO]?
Modem [YES]??
Options: YES,NO
Modem [YES]?
Master or Slave MUX [MASTER]??
Options: MASTER,SLAVE
Master or Slave MUX [MASTER]?SLAVE
COM>
5.42 TEST (Part of the Communications Sub-
directory)
This command is executed from the privileged communications sub-directory
(that is, in response to the COM> prompt) and is used to test the composite
communications links. It requires an ANSI terminal to display correctly.
The execution of TEST destroys normal communications links, and as a pre-
caution, you are prompted for a specific YES/NO response to continue the
TEST.
A displayed menu allows you to select one of the following options:
1.
Restart the Network.
2. Composite port internal logic test.
3. Composite port external test.
4. Modem control test.
66 CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS