Monitor Counters; Monitor Queue - Digital Equipment MUXserver 100 Reference Manual

5.19 MONITOR COUNTERS
Use this command to provide a continuously updated SHOW COUNTERS dis-
play. This is a privileged command. You can use it to monitor traffic through
the terminal server. Stop the display by typing any character. The local prompt
then appears.
Syntax:
MONITOR [COUNTERS] [NODE node-name]
where
Node-name is the name of a LAT service node.
Example:
LOCAL> MONITOR COUNTERS
NOTE
If
your terminal is a video terminal that supports ANSI escape se-
quences, set the terminal to TYPE ANSI for the optimal display of
the MONITOR command.
5.20 MONITOR QUEUE
Use this command to generate a continuously updated SHOW QUEUE display.
This is a privileged command. Stop the display by typing any character. The
local prompt then appears.
Syntax:
MONITOR QUEUE
Example:
MON QUE
This command example produces a changing display of remote requests as they
are queued and dequeued by the MUXserver 100.
36 CHAPTER 5 MUXserver 100 COMMAND DESCRIPTIONS