Odt; Fatal (Hard) Error Codes Written To Eeprom - Digital Equipment MUXserver 100 Reference Manual

Table 7-4 Fatal (Hard) Error Codes Written to EEPROM (Cont)
Error Code Test Name
Module D
42
Nl
Error in Exerciser
Communications
IE
31
32
33
34
36
Communications Memory failure
Rom 0 Checksum failure
Rom
1
Checksum failure
Rom Checksum failure
Clock Interrupt failure
Communication/DMA failure
7.1.30DT
To enable some indications of the cause of a test failure, the MUXserver 100
enters aDT mode. To enter aDT by choice, enter the following:
LOCAL> SET SERVER ODT ENABLED
LOCAL> ODT
*
(Enter ODT Commands>
*
NS
*
G
LOCAL> SET SERVER ODT DISABLED
This is indicated by the appearance of the '.' prompt.
The following commands are useful.
10 CHAPTER 7 DIAGNOSTICS